Magnetic Lubrication Technologies

High-performance food grade synthetic greases Features

•Wide service-temperature range
-40 to 150°C, -40 to 302°F

•Compatible with many plastics and elastomers

•Meet FDA Regulation 21 CFR 178.3570 and NSF H1 classifications for incidental food contact

• Fully synthetic base oil

•Available in NLGI consistency classes 1 and 2 Benefits

• Formulated to provide higher load carrying capacity, greater wear resistance and longer service life compared to conventional petroleum-based lubricants

•Provide good compatibility with most industrial and engineering substrates, including many plastic and rubber materials

•Excellent low temperature torque

•Being a Lower-consistency formulation, MOLYKOTE® G-4501 FMS Multi-Purpose Synthetic Grease allows use in automatic dispensing systems

•MOLYKOTE® G-4500 FMS Multi-Purpose Synthetic Grease is available in a spray form Composition

•PAO base oil •Aluminum complex thickener

•No intentional polytetrafluoroethylene, per and / or poly fluoroalkyl substances Applications Multi-purpose light-consistency white synthetic greases can be used in rolling element and plain bearings, pivot pins, cams, guides, ways, drive screws, gears, splines, and other machine elements.

Shell Gadus S3 V220C greases are premium multi-purpose greases based on high viscosity index mineral oil and lithium complex soap thickener. They contain the latest additives to offer excellent high temperature oxidation performance and other additives to enhance its anti-oxidation, anti-wear and anti-corrosion properties. Shell Gadus S3 V220C greases are especially suitable for bearings operating at high temperature and under load.

Lubrication of slow-running rolling and friction bearings, rollers, transport chains or sliding surfaces on kiln trolleys, bakery machines, drying tunnels, foundry machines, boiler firing systems, plastics processing machines for welding and soldering machines etc

Applications:

 Stable over a wide temperature range and conditions NON Melting

 Excellent Electrical Insulator

 High Dielectric Strength and Properties

 Usable for incidental food contact

 Odorless and non-toxic

 Corrosion Inhibitor 

FSG is general purpose grease developed specifically for use in “clean room” industries such as food, beverage, pharmaceutical and personal care products. The waterproof properties of FSG make it suitable for the wet environments often encountered in the food and beverage industries. FSG is fortified with rust and corrosion inhibitors for added protection in wet conditions.

Applications TORQ – FSG food-grade greases are suitable for food industries such as:

 Manufacture of food packaging

 Robot lubrication application

 Animal feed production industries

 Food and drink industries (bread, meat, milk, water...)

 Other types of food industries.

 For general motor bearings/ sliding process, filling and sealing parts.

 Compatibility with metal to plastic

 For bakery ovens, Pharma industries, beverage industries and etc.. 

ress-fit production of all types of machine elements, as a running-in Lubricant for new machines and gearboxes. Permanent lubrication of machine elements that are moved only rarely or slightly and also for drilling, sawing and thread cutting. Used successfully for lubricating threaded spindles, splined shafts, toothed gears, worm and transmission gears, screws, valves, pumps, and machine-tool guides and also for the tightening and fitting of roller bearings, washers, wheels, flanges and bolts.

Performance Benefits

• High load-carrying capacity
• Low coefficient of friction
• Prevents frictional corrosion and scoring
• Protection from stick-slip
• Good anti-corrosion properties
• Reduces formation of fretting corrosion
• Simplifies dismantling processes
• High surface-covering capacity (40 m2/kg)

Mobilith SHC 007 is an NLGI 00 Grade / ISO VG 460 grease with a synthetic base fluid; it has a recommended operating temperature range of -50º C to 150 º C with appropriate relubrication intervals. Its primary uses are in grease filled industrial gear cases subject to high temperatures, where conventional semi fluid greases will not provide acceptable lubricant life and in non-driven heavy-duty truck trailer wheel hubs.

 

Use of a fit for purpose grease when there is a continuous and unavoidable grease spillage due to the design of the equipment. • Fair protection against wear due to good EP properties 

Shell Gadus S1 V220 2 is unlikely to present any significant health or safety hazard when properly used in the recommended application, and good standards of industrial and personal hygiene are maintained. For further guidance on Product Health & Safety refer to the appropriate Shell Material Safety Data Sheet 

The Shell Gadus range of greases is engineered to deliver optimum value by providing superior wear protection, extended grease life, and enhanced system efficiency. As a complete portfolio of lubrication solutions, Shell Gadus offers both multipurpose greases - helping streamline product inventories - and specialty formulations tailored for critical applications. These include advanced polyurea-based synthetic greases for extreme temperature and long-life performance, as well as dedicated open-gear lubricants designed for heavy-duty industrial demands.

Whether you need greases for steel production, mining, construction, power generation, general or automotive manufacturing, other applications or your vehicles, Shell has a grease designed to meet your challenges. The Shell Gadus range of greases offers protection across a wide range of applications. The range includes Shell's latest extreme temperature "T" polyurea synthetic greases, which can help to protect bearings under extreme temperatures, heavy loads and contaminated conditions. Shell Gadus greases can help to maintain or even improve the efficiency of your systems. From greases that offer reliable performance for standard applications to specialist low-noise, high-temperature and heavy-load greases, there is a Shell Gadus product that can help to optimise your system's efficiency and costs of operation.

Shell Gadus is Shell's premium range of greases designed to provide:
- Superior wear protection
- Extended re-lubrication intervals
- Enhanced equipment reliability
- Efficient operational performance across a variety of industrial and mobile equipment applications.

Shell Gadus greases utilize advanced thickener technology (lithium, lithium complex, polyurea, calcium, calcium sulfonate complex) combined with high-quality base oils and specialized additive systems to deliver performance across diverse temperature and load conditions.

Shell Gadus S3 V220C 2 greases are premium multi-purpose greases based on high viscosity index mineral oil and a lithium complex soap thickener. They contain the latest additives to offer excellent high temperature oxidation performance and other additives to enhance its anti-oxidation, anti-wear and anti-corrosion properties. Shell Gadus S3 V220C 2 is especially suitable for bearings operating at high temperature and under load.

Shell Gadus S3 V220C 2 main applications:

• Shell Gadus S3 V220C greases are used for the grease lubrication of heavy-duty bearings used in machinery found in the following applications:
• Continuous casting
• Vibrating sieves
• Quarries
• Breakers
• Roller conveyors
• Automotive Wheelbearings

Grease