Magnetic Lubrication Technologies

Areas of application

• Removal of loose oxide and electrode-erosion residues, dust deposits or creepage currents which cause soiling in moving contact areas such as motor-vehicle ignition distributors, relay contacts, resistance or potentiometer slideways, in static contact areas such as motor-vehicle spark plugs, plug-in connections, sliding and screw connections, in or on electrical and electronic equipment or devices of all kinds

Advantages and benefits

• Highly effective due to outstanding cleaning properties
• Broad range of uses for all maintenance and customer service work in electrical sector
• Fast evaporation after striking surface

Technical specifications

• density (at 20°C): 0.7248 g/cm³

Applications

Disconnect voltage and shunt electrostatic charge prior to application. Spray on areas to be cleaned until the desired cleanliness is reached. Components are generally considered to be compatible with plastics, but because of the big variety of materials we recommend you to check the resistance before use.

Areas of application

• Cleaning of cooling devices, beverage and goods vending machines
• Cleaning of tiles, ceramics or natural stone
• Cleaning of construction machines and lorries, tarpaulins
• Cleaning of machine tools and workshop floors

Advantages and benefits

• NSF A1 registered
• No classification marks according to (EG) No. 1272/2008
• Free of organic solvents and phosphates
• Readily biodegradable
• Good separation behaviour
• Gentle to plastics, seals, rubber and sensitive metal surfaces
• Depending on the degree of soiling, can be diluted up to 1:10
• Suitable for use with high-pressure cleaners
• OKS 2650 is suitable for use with the OKS Airspray system
• MOSH/MOAH-free (as per recipe)

Technical specifications

• density (at 20°C): 1.03 g/cm³
• pH value: 10.7 (concentrate)

Applications

OKS 2650 is supplied ready for use. Additional dilution is usually not required. The cleaner has to be diluted more (1:10) to clean mirrors and glass surfaces. After spraying on, rub in mechanically and let it soak in for some minutes. Then rinse with clear water. Repeat the application at stubborn soiling. Caution: In the case of metal surfaces that can corrode when in contact with water dry the cleaned service thoroughly. OKS 2650 is not suitable for cleaning alkali-sensitive materials, acrylic and polycarbonate glass. We recommend therefore that you check the resistance of the surface before use.