Magnetic Lubrication Technologies

Dry and clean protective film fast to handling on a wax basis for metals that can be removed easily and protects against corrosion reliably up to two years. 

• Preservation of bare metal surfaces of all kinds, which are stored for longer periods and are subject to effects of weathering (tropics, ocean, industrial atmosphere)
• Ideal on-call and storage protection for spare parts with possibility of direction installation.

Areas of application

• Dismantling of all seized or sticky components or machine elements, e.g. door locks, hinges, screws, bolts, bushings, cranks, linkages, valves, slide rails, cable pulls, shafts, etc.
• Lubrication of fine-mechanical instruments, measuring instruments, office and computer equipment etc., even at low temperatures

Advantages and benefits

• Highly effective due to ideal combination of mineral oil and additives with solvent
• Broad range of uses in the complete maintenance sector
• Displaces moisture, protects against corrosion
• Cleans, maintains and lubricates
• Gets under rust

Technical specifications

• lower operating temperature: -30 °C
• upper operating temperature: 60 °C / 150 °C (with solvent / after evaporation of the solvent)
• density (at 20°C): 0.83 g/cm³
• viscosity at (40°C): 3 mm²/s (with solvent)
• coefficient of friction SRV (μ): 0.11 (ball, disk)
• salt spray test: > 100 h

Applications

Apply generously to the points to be lubricated, sticky or rusted points. Let the product air. Allow to work in for time corresponding to the degree of binding and the depth of penetration required. Repeat as necessary. Light blows on the corresponding point makes the loosening process easier. Only mix with suitable lubricants.

Removes Rust
Inhibits Corrosion
Lubricates Precision ComponentsDisplaces MoistureRestores Electrical Contacts
Protects MetalsENDU FREE CFC

 

Article No.: 5300641005