Magnetic Lubrication Technologies

Areas of application

• Parting agent for casting, injection moulding, blow moulding and extrusion processes of plastics and elastomers
• Prevents sticking, for example of excess adhesive and sealant
• Eliminates creaking and squeaking noises when surfaces made of plastics, elastomers and metals rub on each other
• For easy fitting of plastic and rubber profiles, e.g. in door and window construction
• Lubricant for cutting edges of paper, cardboard, veneer or textile machines, etc.

Advantages and benefits

• NSF H1 registered
• Highly effective due to outstanding surface wetting and formation of separating film with antistatic properties
• Broad range of uses for long-term lubrication, protection, care and impregnation of material surfaces made of metal, plastic and rubber
• Minimal consumption through formation of extremely thin films
• Resistant to water and weathering
• Long spray tube for precision application
• MOSH/MOAH-free (as per recipe)

Technical specifications

• lower operating temperature: -50 °C
• upper operating temperature: 200 °C

Applications

Clean the surfaces for optimal effect. Spray on thinly and evenly. Avoid excesses. Caution: Only mix with suitable lubricants. Plastic based on silicone, such as silicone rubber can be attacked by silicone oil. Silicone may not be used at sliding points under pure oxygen.

Areas of applications

• For protection of semi-finished and finished machines and components, tools, spares, bearings, shafts, moving parts, spindles, piston rods, wire cables and drag cables, drive and conveyor chains, hinges and guides etc. during storage and transport, even in extreme weather like coastal and marine atmospheres
• Protects plastics injection moulds used to manufacture precision electronic components
• For preservation under high corrosive loading, e.g. industrial atmospheres, outdoor weathering under roofs of semi-finished products, finished products, parked vehicles, agricultural and construction machines, in building constructions and civil engineering etc.
• Shipping protection of packed and unpacked machines and machine parts, apparatuses and

Advantages and benefits

• Eco-friendly - Free from chlorinated solvents
• Corrosion Protection up to 12 months
• Provides lubrication, protects the metal in extreme conditions, and is resistant to UV rays
• Free from nitrites, phosphates, chromates and other heavy metals
• Highly effective due to multifunctional VCI corrosion inhibitors

Technical specifications

Density: 0.830 g/ml @ +20°C

Areas of application

• Dismantling of all seized or sticky components or machine elements, e.g. door locks, hinges, screws, bolts, bushings, cranks, linkages, valves, slide rails, cable pulls, shafts, etc.
• Lubrication of fine-mechanical instruments, measuring instruments, office and computer equipment etc., even at low temperatures

Advantages and benefits

• Highly effective due to ideal combination of mineral oil and additives with solvent
• Broad range of uses in the complete maintenance sector
• Displaces moisture, protects against corrosion
• Cleans, maintains and lubricates
• Gets under rust

Technical specifications

• lower operating temperature: -30 °C
• upper operating temperature: 60 °C / 150 °C (with solvent / after evaporation of the solvent)
• density (at 20°C): 0.83 g/cm³
• viscosity at (40°C): 3 mm²/s (with solvent)
• coefficient of friction SRV (μ): 0.11 (ball, disk)
• salt spray test: > 100 h

Applications

Apply generously to the points to be lubricated, sticky or rusted points. Let the product air. Allow to work in for time corresponding to the degree of binding and the depth of penetration required. Repeat as necessary. Light blows on the corresponding point makes the loosening process easier. Only mix with suitable lubricants.

For dressing of round and V type indusrtrial belt. 

• Increases tensile force by up to 50 % for all kinds of V-belts, round and flat belts on fans, compressors, pumps, ventilators, mills etc.
• Protects against drying out and wear, prevents belt squeaking and slip

Wax-based Anti-corrosion and Lubricating Agent. Lusin®mp7010 (Spray) is an Efficient Anti-corrosion Agent That Alsoshows Lubricating Properties. The Wax-based Protective Film Isresistant to Handling and Starts Melting at Around 50°c /122°f. The Product Can Be Visible Under Uv Light  (Maximum At365 Nm).

500ml Oks 9361 Green Spray is a versatile and efficient solution designed for various cleaning and maintenance tasks. Its powerful formula effectively removes dirt, grease, and grime, making it ideal for both household and industrial applications. The convenient spray bottle allows for easy application, ensuring that users can target specific areas with precision. This eco-friendly product not only delivers outstanding results but also promotes a cleaner environment, making it a smart choice for conscientious consumers.